Looking to power my xt’s with usb, all 3 cams would be within 10-12ft of wall plug. Would I be able to use this 4 port wall adapter for all 3 cam?? Output rating of each port is 5v-2.4 amps… Or is 2.4 amps too much??
AmazonBasics 40W 4-Port USB Wall Charger - Black https://www.amazon.com/dp/B0773BH5VV/ref=cm_sw_r_cp_api_i_xdtbDbZWMPCG2
Devices take what they need. The issue with power is “is it enough?”
A device needing more than 2.4 amps won’t work. Anything less than that is ok. So. Blink specs 5V/1A, so if each port’s max is 2.4A, you’re fine.
You’re good to go
I would go with a single fort adapter if possible, or maybe something like this.
This is basically what I am using
Went with the Anker 5 port and 3 26’ cables… tested all my cams without batteries and they all work perfect. I did put the batteries back in for backup though. Now i dont have to worry about dead batteries and was able to turn up sensativity and increase record time… gonna try out enhanced 1080p. soon